Ignition / MisfireHigh ImpactPetrol

P0302 — Diagnostic Trouble Code P0302

OBD-II diagnostic code P0302 relates to the ignition / misfire system. This code is logged when the ECU detects a parameter outside its expected operating range.

5+

Affected Brands

12+

ECU Platforms

3

Related Services

8

Related DTCs

Symptoms

What the driver typically experiences when P0302 is stored

!Check Engine Light (may flash)
iEngine misfires
iRough idle
iLoss of power

Why does P0302 appear after tuning?

This code may appear after ECU modifications when the affected system monitoring has not been fully recalibrated for the new operating parameters.

How proper calibration can address P0302

WEREMAP professional calibrations include comprehensive diagnostic management for all affected systems, preventing unnecessary fault codes while maintaining safe operation.

Related Tuning Services

Relevant services for the system behind P0302

Stage 1Stage 2DTC Off

Related Diagnostic Codes

Codes from the same diagnostic system as P0302

P0300High Impact

Random/Multiple Cylinder Misfire Detected

P0303High Impact

Diagnostic Trouble Code P0303

P0304High Impact

Diagnostic Trouble Code P0304

P0301High Impact

Diagnostic Trouble Code P0301

P0306High Impact

Diagnostic Trouble Code P0306

P0017Moderate Impact

Diagnostic Trouble Code P0017

P0014Moderate Impact

Diagnostic Trouble Code P0014

P0366High Impact

Diagnostic Trouble Code P0366

Affected ECU Platforms

Bosch MED17.7.2Bosch MED9.1Bosch MG1CS015Bosch MG1CP002Bosch MED17.1.9Bosch MED17.1.9 MED17.9.9Bosch MED17.5.21Bosch MED17Siemens/Continental SIMOS10.1xBosch MED 9.1Valeo V40Bosch med7.6.2

Commonly Affected Vehicles

FordF150Bosch MG1CS015
MBCLSBosch MG1CP002
Land RoverRange RoverBosch MED17.1.9
AudiA3Bosch MED17.5.21
MBA / A BerlineBosch MED17.7.2
Land RoverRange Rover EvoqueBosch MED17
VWPoloSiemens/Continental SIMOS10.1x
AudiTT SBosch MED 9.1

Based on data from 5+ vehicle brands. P0302 is not limited to these models.

Frequently Asked Questions

What does P0302 mean?â–¼
OBD-II diagnostic code P0302 relates to the ignition / misfire system. This code is logged when the ECU detects a parameter outside its expected operating range.
Why does P0302 appear after ECU tuning?â–¼
This code may appear after ECU modifications when the affected system monitoring has not been fully recalibrated for the new operating parameters.
How do you prevent P0302 during remapping?â–¼
WEREMAP professional calibrations include comprehensive diagnostic management for all affected systems, preventing unnecessary fault codes while maintaining safe operation.
Which vehicles are affected by P0302?â–¼
P0302 is commonly found on Ford, MB, Land Rover, Audi, VW vehicles equipped with Bosch MED17.7.2, Bosch MED9.1, Bosch MG1CS015, Bosch MG1CP002 ECU platforms.
What other codes appear alongside P0302?â–¼
P0302 frequently appears together with P0300, P0303, P0304, P0301, P0306. These related codes typically originate from the same system modification and should be addressed together in the calibration.

Ready to Get Started?

Create your free account and access our full vehicle database and tuning services.

Create Free Account