Bosch EDC17CP14 is now live in WEREMAP Mappack Builder. Upload a supported VAG diesel binary and generate a WinOLS JSON mappack with clean folders, English map names, units, factors, axis setup and comments. Source calibration values are not copied into the export.
1,770 unique EDC17CP14 mappacksLive now in Mappack Builder
WinOLS JSON outputFor licensed WinOLS users
1,770 unique EDC17CP14 WinOLS JSON mappacks are available in Mappack Builder at the moment. Upload the binary, let WEREMAP match the software version and create the matching JSON when the profile is supported.
Base mappack40 credits
EGR removal maps+5 credits
DPF removal maps+5 credits
DTC removal maps+5 credits
The EGR, DPF and DTC removal maps are optional map definitions inside the WinOLS JSON. They are not ready-made removal files. If a removal map set is not supported for the uploaded software version, the option stays disabled and those maps are left out of the mappack.
WinOLS folder preview
DPF control22 maps
- DPF exhaust temperature target - inner loop EOM1 empty-filter
- DPF exhaust temperature target - inner loop EOM1
- DPF exhaust temperature target - inner loop EOM empty-filter
- DPF exhaust temperature target - inner loop EOM
- DPF temperature target correction - inner loop soot mass correction
- DPF exhaust temperature target - inner loop empty-filter
- DPF temperature target correction - inner loop turbine temperature correction
- DPF exhaust temperature target - inner loop base
- DPF exhaust temperature target - outer loop EOM1 empty-filter
- DPF exhaust temperature target - outer loop EOM1
- DPF exhaust temperature target - outer loop EOM empty-filter
- DPF exhaust temperature target - outer loop EOM
- DPF temperature target correction - outer loop oxygen mass-flow correction
- DPF temperature target correction - outer loop soot mass correction
- DPF exhaust temperature target - outer loop empty-filter
- DPF temperature target correction - outer loop downstream temperature correction
- DPF exhaust temperature target - outer loop base
- DPF EEPROM array read index
- DPF extended monitoring switch
- DPF software substitute switch
- DPF function disable switch
- DPF EEPROM service reset switch
DPF regeneration injection17 maps
- Post injection 2 quantity base - regen stage 1 with PoI3
- Post injection 2 quantity base - regen stage 1
- Post injection 2 quantity base - regen stage 2 with PoI3
- Post injection 2 quantity base - regen stage 2
- Post injection 2 quantity base - regen stage 3 with PoI3
- Post injection 2 quantity base - regen stage 3
- Post injection 2 soot regeneration quantity - stage 0
- Post injection 2 soot regeneration quantity - stage 1
- Post injection 1 quantity base - regen stage 1
- Post injection 1 quantity base - regen stage 2
- Post injection 1 quantity base - aged catalyst
- Post injection 1 soot regeneration quantity - stage 0
- EGT correction injection quantity - regen map 0
- EGT correction injection quantity - regen map 1
- EGT correction injection quantity - regen map 2
- EGT correction injection quantity - regen ambient-pressure map 0
- EGT correction injection quantity - regen ambient-pressure map 1
EGR control19 maps
- EGR shutoff upper IQ threshold - DPF regen
- EGR shutoff upper IQ threshold
- EGR cold-start lower IQ threshold
- EGR shutoff lower IQ threshold - DPF regen
- EGR shutoff lower IQ threshold
- Overrun RPM threshold by engine temperature
- Overrun cut-off RPM threshold
- Air temperature monitor selector
- Engine temperature monitor selector
- Air control shutoff RPM high window
- Air control shutoff RPM low window
- Overrun injection quantity threshold
- Atmospheric pressure monitor high hysteresis
- Atmospheric pressure monitor low hysteresis
- EGR delayed shutoff IQ threshold - cold
- EGR delayed shutoff IQ threshold
- Air control shutoff IQ maximum threshold
- Air control shutoff IQ minimum threshold
- EGR cold-start upper IQ threshold
DTC removal maps - OBD blocks3 maps
- DTC error class block - remove DTC line with 0
- DTC error mask block - remove DTC line with 65535
- OBD diagnostic trouble code block - DTC can be removed optional
Engine torque request7 maps
- Driver wish torque - gear 1
- Driver wish torque - gear 2
- Driver wish torque - gear 3
- Driver wish torque - gear 4
- Driver wish torque - AWD/low range
- Driver wish torque - reverse gear
- Driver wish torque monitor
Engine torque limiters5 maps
- Engine torque limiter - atmospheric pressure
- Engine torque limiter - pilot injection inactive
- Full-load torque increase by engine temperature
- Engine torque limiter - AWD vehicles
- Engine torque limiter - level-control vehicles
Torque monitoring2 maps
- Torque monitoring upper vehicle speed threshold
- Torque monitoring internal engine torque maximum
Torque to fuel conversion4 maps
- Torque to fuel quantity - DPF regen stage 1
- Torque to fuel quantity - DPF regen stage 2
- Torque to fuel quantity base - PFlt10
- Torque to fuel quantity base
Injection system2 maps
- Injection duration - all injections
- Fuel temperature pressure-wave correction factor
Rail pressure15 maps
- Rail pressure maximum - operating point map 1
- Rail pressure maximum setpoint fallback
- Rail pressure maximum map selector by coolant temperature
- Rail pressure maximum by RPM and injection quantity
- Rail pressure base setpoint selector
- Rail pressure maximum difference before limiting
- Rail pressure minimum additive correction before limiting
- Rail pressure start setpoint - pilot 2 inactive
- Rail pressure start setpoint - pilot 2 active
- Rail pressure base setpoint - injection characteristic 1
- Rail pressure base setpoint - injection characteristic 2
- Rail pressure base setpoint - injection characteristic 3
- Rail pressure base setpoint
- Rail pressure base setpoint - DPF regen stage 1
- Rail pressure pre-control via pressure control valve
Smoke limitation10 maps
- Smoke limiter pressure reference
- Smoke quantity limit by pressure
- Lambda maximum - next operating mode
- Lambda maximum - current operating mode
- Lambda minimum - next operating mode
- Lambda minimum - current operating mode
- Smoke lambda limiter map 0
- Smoke lambda limiter map 1
- Smoke lambda limiter map 2
- Smoke lambda limiter - EOM1
Start of injection SOI41 maps
- SOI main injection MI1 - no pilot set 1
- SOI main injection MI1 - no pilot set 2
- SOI main injection MI1 - no pilot set 3
- SOI main injection MI1 - no pilot set 4
- SOI main injection MI1 - no pilot set 5
- SOI main injection MI1 - no pilot set 6
- SOI main injection MI1 - pilot 1 set 1
- SOI main injection MI1 - pilot 1 set 2
- SOI main injection MI1 - pilot 1 set 3
- SOI main injection MI1 - pilot 1 set 4
- SOI main injection MI1 - pilot 1 set 5
- SOI main injection MI1 - pilot 1 set 6
- SOI main injection MI1 - pilot 1+2 set 1
- SOI main injection MI1 - pilot 1+2 set 2
- SOI main injection MI1 - pilot 1+2 set 3
- SOI main injection MI1 - pilot 1+2 set 4
- SOI main injection MI1 - pilot 1+2 set 5
- SOI main injection MI1 - pilot 1+2 set 6
- SOI main injection MI1 - pilot 1+3 set 1
- SOI main injection MI1 - pilot 1+3 set 2
- SOI main injection MI1 - pilot 1+3 set 3
- SOI main injection MI1 - pilot 1+3 set 4
- SOI main injection MI1 - pilot 1+3 set 5
- SOI main injection MI1 - pilot 1+3 set 6
- SOI main injection MI1 - pilot 3 set 1
- SOI main injection MI1 - pilot 3 set 2
- SOI main injection MI1 - pilot 3 set 3
- SOI main injection MI1 - pilot 3 set 4
- SOI main injection MI1 - pilot 3 set 5
- SOI main injection MI1 - pilot 3 set 6
- SOI MI1 DPF regen stage 1 - base set 1
- SOI MI1 DPF regen stage 1 - base set 2
- SOI MI1 DPF regen stage 1 - base set 3
- SOI MI1 DPF regen stage 1 - base set 4
- SOI MI1 DPF regen - no pilot
- SOI MI1 DPF regen - pilot 1
- SOI MI1 DPF regen - pilot 1+2
- SOI MI1 earliest limit - map 1
- SOI MI1 earliest limit - map 2
- SOI MI1 minimum by RPM and boost pressure
- SOI MI1 minimum by RPM and engine temperature
Turbo boost pressure10 maps
- Maximum turbocharger speed
- Boost target base - EOM quantity mode 1
- Boost target map - Bosch II 16
- Boost target base - high altitude
- Boost target base - pilot 1 high altitude
- Boost target base - pilot 1
- Boost target base - pilot 2 high altitude
- Boost target base - pilot 2
- Boost target base
- Boost target upper limit
Exhaust gas temperature EGT23 maps
- EGT fallback source switch - DPF upstream
- EGT fallback source switch - turbine upstream
- EGT raw voltage filter switch - oxidation catalyst downstream
- EGT raw voltage filter switch - DPF downstream
- EGT raw voltage filter switch - DPF upstream
- EGT raw voltage filter switch - turbine upstream
- EGT sensor present switch - oxidation catalyst downstream
- EGT sensor present switch - DPF downstream
- EGT sensor present switch - DPF upstream
- EGT sensor present switch - turbine upstream
- EGT fallback value - oxidation catalyst downstream
- EGT sensor ID/status - oxidation catalyst downstream
- EGT fallback value - DPF downstream
- EGT sensor ID/status - DPF downstream
- EGT fallback value - DPF upstream
- EGT sensor ID/status - DPF upstream
- EGT fallback value - turbine upstream
- EGT sensor ID/status - turbine upstream
- EGT voltage to temperature conversion - oxidation catalyst downstream
- EGT voltage to temperature conversion - DPF downstream
- EGT voltage to temperature conversion - DPF upstream
- EGT voltage to temperature conversion - turbine upstream
- EGT controller activation switch
Gearbox torque limiter12 maps
- Gearbox input torque maximum
- Gearbox torque limiter - gear 1
- Gearbox torque limiter - gear 2
- Gearbox torque limiter - gear 3
- Gearbox torque limiter - gear 4
- Gearbox torque limiter - gear 5
- Gearbox torque limiter - gear 6
- Gearbox torque limiter - reverse gear
- Gearbox torque protection from CAN switch
- Gearbox torque protection freeze switch
- Maximum torque at clutch
- Gearbox torque fallback during final CAN error
Vehicle speed limiters1 maps
- Vehicle speed limiter - customer maximum
Start torque2 maps
- Start torque base
- Start torque
Misc CAN and service2 maps
- CAN maximum torque RPM multiplex value
- CAN maximum engine torque multiplex value
Available in Mappack Builder
Open VIP Tools, upload the ECU binary and let Mappack Builder create the WinOLS JSON for the matched software. The output is made for licensed WinOLS use and keeps the mappack metadata only.